Hiwonder SpiderPi Pro review
A six-legged Raspberry Pi robot with a five-axis vision arm for learning locomotion and manipulation in one platform.
Robot Current is reader-supported and may earn a commission from qualifying purchases through affiliate links, at no extra cost to you. Brands cannot buy a recommendation. How this works.
We recommend the SpiderPi Pro for a robotics project that needs locomotion and object handling in the same Raspberry Pi kit. The selected ThinkRobotics India variant pairs the hexapod with a Raspberry Pi 5 (4GB), and Hiwonder lists a five-axis arm, camera, Python and OpenCV exercises, plus mobile controls. Plan for arm and camera setup in a dedicated workspace. ThinkRobotics showed a 2 to 4 week lead time when checked; code eligibility for this exact kit remains unverified.
Makers, educators and labs combining a mobile hexapod, camera and small-object manipulation in a defined Python project, with room for assembly and software setup.
- Selected configuration
- Raspberry Pi 5 (4GB)
- ThinkRobotics SKU
- HIWND-082; variant 49260996165949
- Legs
- Six, with three degrees of freedom per leg, manufacturer specification
- Vision arm
- Five degrees of freedom; Hiwonder’s manual includes an installation step
The quick answer
The reviewed ThinkRobotics India configuration is Hiwonder SpiderPi Pro with a Raspberry Pi 5 (4GB), SKU HIWND-082 and variant 49260996165949. It was listed at ₹1,12,999.99 on October 28, 2026 and showed a 2 to 4 week lead time. Hiwonder describes a six-legged robot with a five-axis vision arm and Python/OpenCV projects. Choose it when mobile manipulation is the learning goal; confirm the final package and code eligibility before ordering.
Why we like it
- Six legs with three degrees of freedom per leg give the project a clear hexapod locomotion focus.
- Hiwonder describes a five-axis vision arm alongside the camera for its picking, sorting and transfer exercises.
- The selected ThinkRobotics variant names a Raspberry Pi 5 with 4GB, making the reviewed controller configuration explicit.
- Hiwonder documents mobile-app and PC controls as well as Python programming, so a learner can choose a starting point.
Before you buy
- ThinkRobotics showed a 2 to 4 week lead time and a pre-order button, so the feed availability flag does not confirm immediate dispatch.
- Hiwonder’s manual includes separate camera and arm installation steps, so plan for assembly and software setup.
- Hiwonder claims about 40 minutes of continuous use and its manual says charging takes about three hours; treat both as manufacturer guidance.
- ThinkRobotics and Hiwonder publish conflicting battery C-ratings. Confirm the exact battery specification if that detail matters to your project.
A mobile manipulator rather than a walking novelty
The SpiderPi Pro combines a six-legged platform with a five-axis arm and camera, so it can support a project that moves between gait control and small-object handling. Hiwonder lists three degrees of freedom per leg and documents the arm as part of the Pro system. The value is that combined learning path, not a promise of task performance. Choose it when locomotion and manipulation belong in the same lab exercise.
This review covers the Raspberry Pi 5 4GB option
ThinkRobotics’ exact variant is Raspberry Pi 5 (4GB), seller SKU HIWND-082. The page also offers Raspberry Pi 4B and other memory options at different listed prices. Hiwonder’s page describes Raspberry Pi 4B and Pi 5 support, so check that the selected controller, prepared software and current box contents match your project before ordering. Do not assume that the specifications of another memory option describe this exact listing.
Build the project around the controls you will use
Hiwonder describes Python programming, OpenCV exercises, a WonderPi app and PC software for manual servo control and action groups. Its examples include line following, shape recognition and moving objects between areas. These are manufacturer-described learning exercises, not Robot Current performance tests. The mix suits a learner who wants to move from direct control toward code and perception, while a class that needs Hiwonder’s ROS1/ROS2 route may prefer the PuppyPi configuration.
Make room for setup, movement and care
Hiwonder’s manual includes steps to install the camera and arm, so allow bench space for assembly and a clear operating area. It lists about 40 minutes of continuous use, while the setup guide says a full charge takes about three hours. Those are manufacturer figures rather than measured runtime. The same guide says not to force the servos while powered, notes that servos may heat during long sessions, and advises keeping hands clear of moving joints.
Choose between the SpiderPi Pro and PuppyPi by task
The PuppyPi Standard review covers a quadruped with a Raspberry Pi 5 (8GB) and Hiwonder-documented ROS1/ROS2 support. SpiderPi Pro is the better match when the six-legged platform and included vision arm are central and the Pi 5 (4GB) option fits your software. The product comparison below sets out their motion and programming differences without treating joint count as a performance score.
Our buying advice and the ThinkRobotics code
ThinkRobotics listed the selected SpiderPi Pro at ₹1,12,999.99 on October 28, 2026 and showed a 2 to 4 week lead time with a pre-order button. The owner-supplied partner offer reports 3% off with SEBASTIANBASSOL, making ₹1,09,609.99 a conditional estimate if it applies to this exact variant and price. Eligibility, exclusions, stacking and checkout savings are unverified. Confirm the package, lead time and final total before paying.
The details at a glance
| Selected configuration | Raspberry Pi 5 (4GB) |
|---|---|
| ThinkRobotics SKU | HIWND-082; variant 49260996165949 |
| Legs | Six, with three degrees of freedom per leg, manufacturer specification |
| Vision arm | Five degrees of freedom; Hiwonder’s manual includes an installation step |
| Camera | 480P, manufacturer specification |
| Sensors | Ultrasonic ranging listed at 2 to 400 cm; IMU and LED dot-matrix module |
| Battery | 11.1V, 3,500mAh LiPo; the product pages conflict on C-rating, so it is not stated here |
| Manufacturer runtime | About 40 minutes of continuous use |
| Charging | About three hours to full, per Hiwonder’s manual |
| Software and control | Python, WonderPi mobile app and PC software, manufacturer-listed |
| Body weight | About 3.1 kg, manufacturer specification |
| Listed price | ₹1,12,999.99 INR, selected variant, October 28, 2026 |
| Seller lead time | 2 to 4 weeks; product page showed a pre-order button |
Hiwonder SpiderPi Pro · Makers, educators and labs combining a mobile hexapod, camera and small-object manipulation in a defined Python project, with room for assembly and software setup.
Keep researching
- How to choose a robot arm or developer robot
- Hiwonder SpiderPi Pro vs PuppyPi: choose an arm or a quadruped
Your questions, answered.
What is the discount code for the Hiwonder SpiderPi Pro?
The ThinkRobotics discount code is SEBASTIANBASSOL (3% off) at thinkrobotics.com. The Hiwonder SpiderPi Pro is listed at ₹1,12,999.99, about ₹1,09,609.99 with the code, before tax and shipping. Shop through the link on this page, paste the code at checkout and confirm your total, since ThinkRobotics has not published which models qualify. More detail on the ThinkRobotics offer page.
Which SpiderPi Pro configuration does this review cover?
The selected ThinkRobotics India variant is Raspberry Pi 5 (4GB), SKU HIWND-082 and variant 49260996165949.
What is distinct about SpiderPi Pro?
Hiwonder describes a six-legged robot with a five-axis vision arm. It suits projects that combine gait control with object handling, rather than a project that needs only a walking platform.
What programming and control options are listed?
Hiwonder lists Python, a WonderPi mobile app and graphical PC software. Its documentation and tutorials describe the software path; check them against the operating system and exercises you plan to use.
How long does the battery last?
Hiwonder lists about 40 minutes of continuous use and its manual says a full charge takes about three hours. These are manufacturer figures, not independent measurements.
Is the selected SpiderPi Pro ready to ship immediately?
ThinkRobotics’ feed marked the variant available on October 28, 2026, but the product page showed a 2 to 4 week lead time and a pre-order button. That does not confirm immediate dispatch.
Does SEBASTIANBASSOL definitely reduce this exact order by 3%?
The ThinkRobotics partner record reports 3% off, but eligibility for variant 49260996165949, exclusions, stacking and checkout savings are unverified. Confirm the final total in the order flow.
How we put this review together
- Product information checked against official sources on October 28, 2026; reviewed listing: ThinkRobotics store.
- Product photography comes from Hiwonder; the background was removed while preserving the supplied product image.
- No scores and no paid placement. Our recommendation is about fit, not commission.
Also worth considering
All reviews
ThinkRobotics LeRobot SO-101 6 Axis Robotic Arm
An open-source LeRobot arm kit for learning how teleoperation and imitation learning fit together.
Best for Makers, educators and research teams ready to assemble and calibrate a six-axis platform for LeRobot experiments
Read the review
Waveshare WAVEGO Pro 12-DOF Bionic Dog-Like Robot
A pre-assembled quadruped for exploring gait control, self-balancing and embedded robotics.
Best for Advanced makers, educators and robotics labs that want an open-source quadruped with an ESP32 controller and an optional Raspberry Pi host
Read the review
Elephant Robotics myCobot 280 M5 (dual-screen version)
A sub-1 kg six-axis desktop arm for learning Python, ROS and robotics.
Best for Students, makers and educators who want a compact six-axis arm to learn kinematics, Python and ROS
Read the review